Trichloroethylene
EPA Designation Regulated
EPA Classification Organic Chemicals
EPA Levels 1,2 zero MCLG (mg/L)
0.005 MCLG (mg/L)
Alternative Names none
Sources Discharge from metal degreasing sites and other factories
Trichloroethylene is used to remove grease from fabricated metal parts and in the production of some textiles; this pollutant comes from metal degreasing sites, metal finishing and rubber processing industries.

Overview

Trichloroethylene, a volatile organic chemical, is a colorless or blue liquid with a chloroform-like odor.

Uses

Trichloroethylene is primarily used to remove grease from fabricated metal parts and in the production of some textiles.

Health Effects

Some people who drink water containing trichloroethylene well in excess of the maximum contaminant level (MCL) for many years could experience problems with their liver and may have an increased risk of getting cancer.

EPA Data Source: Trichloroethylene

EPA Definitions:

1Maximum Contaminant Level Goal (MCLG) - The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety and are non-enforceable public health goals.

Maximum Contaminant Level (MCL) - The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to MCLGs as feasible using the best available treatment technology and taking cost into consideration. MCLs are enforceable standards.

Maximum Residual Disinfectant Level Goal (MRDLG) - The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

(TT) Treatment Technique - A required process intended to reduce the level of a contaminant in drinking water.

Maximum Residual Disinfectant Level (MRDL) - The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

2 Units are in milligrams per liter (mg/L) unless otherwise noted. Milligrams per liter are equivalent to parts per million.